Session 2A

Technologies for Tomorrow

3:30 PM to 5:00 PM | Moderated by AJ Boydston


Microbial Catalysis of Methane to Methanol Processes
Presenter
  • David Stephen (David) Ojala, Senior, Chemical Engineering Washington Research Foundation Fellow
Mentor
  • Marina Kalyuzhnaya,
Session
  • 3:30 PM to 5:00 PM

Microbial Catalysis of Methane to Methanol Processesclose

Methanotrophs are microbes that oxidize methane to methanol with high efficiency. Oxidation of methane to methanol is an attractive solution for reducing methane emissions because methanol is a value-added commodity utilized as both a fuel and chemical feedstock. The major goal of my research project is to develop microbial processes to convert methane to methanol on an industrial scale. Effective microbial oxidation of methane to methanol is currently limited by the lack of robust methanotrophic strains that can tolerate the extreme conditions found in industrial processes while producing a high yield of methanol. A screening of potential candidates for industrial use revealed Methylomicrobium sp. 20Z, a methanotrophic bacteria isolated from soda lakes. Methylomicrobium sp. 20Z tolerates a wide range of pH and salinity while exhibiting relatively high rates of methanol production. While the strain holds the potential to produce a broader range of chemicals from methane, reliable genetic approaches for system-level studies and strain engineering are needed. This research focused on development of a set of molecular tools for genetic investigation and alteration of 20Z metabolism. These genetic tools are being used to optimize 20Z for increased methanol yield. Site-directed mutagenesis has focused on characterization of single amino acid mutations in pMMO, the primary enzyme responsible for catalyzing methane oxidation. Ultimately, genetically engineered strains could be used in industrial bioreactors or wastewater treatment to convert methane emitted from waste resources to methanol.


Rational Design Using Dewar’s Rules for Enhancing the First Hyperpolarizability of Nonlinear Optical Chromophores
Presenter
  • Jane Yen (Jane) Hung, Senior, Mathematics, Physics Mary Gates Scholar, NASA Space Grant Scholar, Washington Research Foundation Fellow
Mentor
  • Xiaosong Li,
Session
  • 3:30 PM to 5:00 PM

Rational Design Using Dewar’s Rules for Enhancing the First Hyperpolarizability of Nonlinear Optical Chromophoresclose

Highly efficient, organic nonlinear optic (NLO) chromophores are being developed as promising candidates for new electro-optic (E-O) devices and nanotechnologies. The E-O response of chromophore efficiency improves with the increase of the second-order polarizability (ß). Considering Dewar's predictions on organic dye structures, the effect on ß of single or multiple substitutions of electron donating or electron accepting groups to the conjugation bridge of phenyltetraene-based donor-conjugation bridge-acceptor chromophores is investigated. The overall effects of the substitutions can be studied by density functional theory (DFT) calculations with two state model approximations and by finite field calculations. Several common electron donating groups (-OCH3, phenoxide, -N(CH3)2, -NH2) and electron withdrawing groups (-SCH3, -COCH3, -CN, -F) are used as substituents. Bond length alternation (BLA) analysis shows the range of optimal BLA and can characterize the results.


Electric Charging in Non-Aqueous Systems
Presenter
  • David S (David) Bergsman, Senior, Chemical Engineering, Computer Science NASA Space Grant Scholar
Mentor
  • John Berg,
Session
  • 3:30 PM to 5:00 PM

Electric Charging in Non-Aqueous Systemsclose

Charged particles in non-aqueous systems are used in a wide range of applications, from the design of electrophoretic displays (e.g. The Kindle®) to the prevention of gunk build-up in motor oil. However, the science behind particle charging in such systems is not fully understood. Previous work has suggested that the presence of surface hydroxyl groups, when combined with certain surfactants, can induce charging on particles. These surfactants also serve to prevent particle aggregation through steric stabilization. However, dispersing these particles typically requires extended sonication or some other dispersive technique. One possible solution for decreasing the dispersion time is to first hydrophobically surface-treat the particles. Unfortunately, this process has the potential to remove the surface hydroxyl groups necessary for particle charging. Currently, we are investigating the effects of surface modification on particle hydrophobicity and chargeability. Silica particles of size 5 and 15 microns are surface treated with tri-methoxy(octyl)silane and Methoxy(dimethyl)octylsilane in order to create hydrophobic silica particles with varying amounts of hydroxide groups on their surfaces. The resulting surface energy and acid/base characteristics of these particles are then tested using Inverse Gas Chromatography. Once the acid/base natures of these particles are fully examined, the particles' chargeability can be assessed by measuring their electrophoretic mobilities using a Zeta Potential Analyzer. The chargeability can then be compared against the acid/base nature of the particles. If the surface modification of these particles preserves their chargeability while maintaining their hydrophobic and acid/base nature, the process of surface-treating particles could be used to reduce dispersion time for charged particles in non-polar media.


Modeling the Effects of Microstructure on the Performance of Porous Mixed Conducting Solid Oxide Fuel Cells
Presenter
  • Melanie Elizabeth (Melanie) Curtis, Senior, Chemical Engineering Mary Gates Scholar
Mentors
  • Stuart Adler,
  • Cortney Kreller,
Session
  • 3:30 PM to 5:00 PM

Modeling the Effects of Microstructure on the Performance of Porous Mixed Conducting Solid Oxide Fuel Cellsclose

Solid oxide fuel cells (SOFC)s generate electricity from the chemical energy of a fuel. In order to make SOFCs a commercially viable way to produce electricity, material costs must be minimized though maximizing cell performance and efficiency. Kinetics of the oxygen reduction reaction, transport of oxygen ions, and microstructure of the electrodes all influence cell performance. The goal of our research is to characterize the influence of electrode microstructure on cell performance. Understanding microstructural effects gives us insight into ways of designing optimized microstructures for superior cell performance. Although there are now technologies capable of reconstructing the exact microstructure of electrodes, doing so is very time consuming and computationally extensive. In addition to evaluating the influence of microstructure on cell performance, we are simultaneously investigating how predictive models can be simplified to a limited number of geometric parameters under different operating regimes.To determine the influences of various geometric parameters, we have created computer models using Comsol Multiphysics approximating the true microstructure of the porous SOFC cathode as a series of simplified geometries. By keeping a single geometric parameter constant among several differently shaped models, we are able to asses the influence of that parameter on the model response. If different models give similar responses, it indicates that the geometric parameter kept constant between them heavily influenced the cell performance and should be further assessed for optimization in actual microstructures.


The Use of Supercritical Water in the Production of Plastic-Derived Fuels
Presenters
  • Milo Umberto (Milo) Zorzino, Sophomore, Pre-Health Sciences
  • John Rocco Di Iorio, Sophomore, Materials Science & Engineering
Mentor
  • Graham Allan,
Session
  • 3:30 PM to 5:00 PM

The Use of Supercritical Water in the Production of Plastic-Derived Fuelsclose

With a growing population comes a growing need for energy. Conventional energy-producing methods have been affected by geopolitical and environmental factors that make them both unsustainable and unpredictable for the long term; a sustainable independent energy source is required. Supercritical water (SCW), water heated to elevated temperatures at great pressures that possesses both the fluid behavior of dissolving soluble and the gaseous behavior of diffusibility, has the ability to quickly dissolve and depolymerize non-polar substances into simpler subunits. Thus, through SCW, chains of hydrocarbons found in common waste plastics can be broken into shorter hydrocarbon chains that are found in diesel fuel. An induction heated batch reactor was constructed in order to determine the minimal optimum conditions to completely liquefy the plastics polystyrene, polyethylene and polypropylene. One gram of all of the three plastics liquefied into hydrocarbons of up to 100% yield in less than 10 seconds under supercritical conditions. Polystyrene was found to be the best starting plastic due to its near 100% yield into insoluble oil within a few seconds without any gasification. This oil was found to be miscible with commercial diesel fuel up to the tested limit of 40%. Currently, our challenge is to economically scale-up this method through the possible use of an extruder-fed continuous reactor and determine the minimal amount of water needed.


The University of Washington is committed to providing access and accommodation in its services, programs, and activities. To make a request connected to a disability or health condition contact the Office of Undergraduate Research at undergradresearch@uw.edu or the Disability Services Office at least ten days in advance.