Session 1P
Engineering Devices and Mathematical Foundations
1:00 PM to 2:30 PM | Moderated by Kristi Morgansen
- Presenter
-
- Trevor Dennis Burns, Senior, Comparative History of Ideas, Community, Environment, & Planning
- Mentor
-
- Susan Bolton,
- Session
-
- 1:00 PM to 2:30 PM
Thousands of people, often children, die every day of preventable water borne illnesses . People are often forced to use contaminated water sources because they are the only water sources available within reasonable distances. Many organizations worldwide are exploring new ways to purify these water sources in a manner that is appropriate and affordable for these regions. Reclaiming Common Waters provides an example of one available option that can be implemented with low levels of financial and technological investment, but which can significantly improves health in many struggling communities. To demonstrate the utility of this technology I constructed a bio-sand filter of inexpensive materials which are readily available in developing nations. This filter is capable of providing 36 liters of clean drinking water per hour. Constructed primarily of wooden forms, concrete, and aggregate, this gravity-powered device can effectively remove debris and particulate matter, as well as purify water by removing over 90 percent of the parasites and pollutants that are some of the largest killers of young children in developing communities today. this project is a synthesis of conceptual knowledge applied in a real-world, tangible way that will have a significant impact on the health of any communities in which they are constructed.
- Presenter
-
- Timothy Bruce (Tim) Campbell, Senior, Mechanical Engineering Undergraduate Research Conference Travel Awardee
- Mentor
-
- Shwetak Patel,
- Session
-
- 1:00 PM to 2:30 PM
The plumbing in your home is not immune to failure. In fact, when a water pipe ruptures the property damage and repair costs exceed $5,000 on average. Automated shutoff valves that detect standing water are available but require costly installation and cannot detect a pipe rupture in the upper floors of a home. The HydroStop system is a three-part solution to water damage protection. HydroStop detects the leak, transmits a signal to the valve, and actuates a valve to shut off water supply. Detection of a pipe rupture anywhere in the home is achieved with existing sensors. With a detected leak, a transmitter in the home sends a signal to a self-powered receiver located on the HydroStop valve, near the street. Finally, the valve receives a signal and actuates to shut off the water supply to the home. The HydroStop shutoff valve is a retrofit solution to preventing catastrophic pipe failure. The HydroStop system is placed over the existing shut-off valve mandated by the local utility company. In this way the HydroStop system elimintates the need for professional installation and shuts off water before liability for its use falls on the homeowner. Without access to electrical power, the HydroStop valve relies on compressed gas to shut off the water. In this way, the HydroStop system require little effort to install and no effort to maintain, lowering the barrier to water damage protection in the home.
- Presenters
-
- Jordan Thomas (Jordan) Reed, Senior, Physics
- Kara Renee Kagi, Senior, Electrical Engineering
- Brian Thomas Govier, Senior, Physics
- Mentors
-
- Alanson Sample,
- Benjamin Waters,
- Joshua Smith,
- Session
-
- 1:00 PM to 2:30 PM
With the increasing ubiquity of battery powered devices such as cell phones and laptops, it has become more and more desirable to improve their mobility by eliminating the need to be plugged into an outlet. One prominent example of wireless power transfer is known as the power mat, which wirelessly charges a cell phone or camera over a distance of a few cm using the magnetic flux created by an inductive circuit. Under the same principal, circuits that utilize large-size wire coil inductors oscillating at the same resonant frequency allows power transfer to take place wirelessly through the magnetic flux created by the coupled circuits over much larger distances. Previous efforts concentrating on the use of magnetically-coupled inductors to propagate practical amounts of power through air over distances on the order of a few coil diameters have been successful. However, in order to increase the efficacy of this technology, the system ought to be both simple and inexpensive. By testing different oscillator designs that utilize different transistors, a small and inexpensive oscillator circuit was developed to replace the expensive components of the original design. Past studies have shown power-transfer efficiencies of 70% in a 2ft range with the use of the expensive amplifier. As such, the efficiency of this system was expected to produce similar results. Using several magnetically resonant coils designed to oscillate around the same frequency, a DC power source, and an oscillator circuit to drive the system at the desired frequency, we have been able to demonstrate power transfer over distances of about one coil diameter. To produce data that is significant to real-world applications, this system is being characterized over a 1 meter distance. Within this distance, efficient wireless power transfer has many practical uses, from powering laptops to implanted medical devices.
- Presenter
-
- Elizabeth Landicho (Elizabeth) Wicks, Junior, Mathematics (Comprehensive), Physics
- Mentor
-
- Efstratios Prassidis, , University of the Aegean
- Session
-
- 1:00 PM to 2:30 PM
The Ihara Zeta Function of a finite graph encodes its spectral, combinatorial and number theoretic properties. For infinite graphs, the IZF is defined as a limit of appropriate finite approximations of the graph. Our interest is in computing the IZF of the modular group PSL(2,Z). Since this group plays a central role in number theory and other areas of mathematics and physics, the hope is that the zeta function will reflect important information about modular forms and elliptic curves. Originally, the finite approximations we used were through the principal congruence subgroups, that is, the subgroups that contain elements which are reduced to the identity modulo n. Even though we successfully carried out the calculations for small values of n, we could not generalize our results. As an alternative approach, we used certain supergroups of the above groups that had finite index in PSL(2,Z). Even though we still could not find a pattern, we were able to provide an algorithm that computes the IZF of all the finite approximations.
- Presenter
-
- Alexander Weber (Alexander) Spott, Senior, Physics, Applied & Computational Mathematical Sciences (Engineering & Physical) Mary Gates Scholar, Washington Research Foundation Fellow
- Mentor
-
- Michael Hochberg,
- Session
-
- 1:00 PM to 2:30 PM
Currently, the majority of experiments with silicon waveguides have been at wavelengths in the near-infrared, between 1.1-2 µm. The mid-infrared (MIR) wavelengths, between 2-20 µm, are important for a number of application areas, including chemical bond spectroscopy, biosensing, and thermal imaging. We show that by using a material system which lacks a high index substrate, single-mode silicon nano-waveguides can be constructed for MIR wavelengths. We demonstrate waveguides, built on the silicon-on-sapphire material system, operating at 5.5 µm with optical propagation losses of 4.0 dB/cm. Additionally, we demonstrate ring resonator devices centered around these wavelengths with Q-values as high as 3.0 k. This result represents what we believe to be the first working micro ring resonators for the mid-infrared, and enables a range of new applications.
- Presenter
-
- Pranoti G (Prano) Hiremath, Senior, Bioengineering Goldwater Scholar, Mary Gates Scholar, NASA Space Grant Scholar, Washington Research Foundation Fellow
- Mentors
-
- Peter Richardson, , Seattle Children's Research Institute
- Joan Sanders,
- Session
-
- 1:00 PM to 2:30 PM
Thoracic insufficiency syndrome (TIS) describes congenital and developmental spine and chest wall disorders that produce respiratory restrictive disease, which severely limits normal respiration. TIS manifests primarily in young children, who may experience lung and heart failure in the absence of treatment. Vertical Expandable Prosthetic Titanium Rib (VEPTR) expansion thoracoplasty surgeries are designed to address volume-depletion deformities caused by TIS. However, the VEPTR device requires recurrent manual surgical intervention in order to expand with patient growth; the surgical constraints carry high risk and subject the patient to great physical and psychological stresses. I propose to design a noninvasive expansion system for the VEPTR that allows full functionality in TIS treatment but limits the requirement for invasive expansion of the device. The device must permit continuous or noninvasive expansion, retain durability throughout the treatment, limit fretting at tissue-metal interfaces, and pass biocompatibility and device insertion standards. The project includes a computational model for the proposed design solution, with testing in silico, and extends into development of physical prototypes by a three dimensional printer. The final prototype in titanium is evaluated through testing with physical simulation of physiological forces.
- Presenter
-
- Ada June (Ada) Zhang, Senior, Music, Bioengineering Mary Gates Scholar, NASA Space Grant Scholar
- Mentors
-
- Yoky Matsuoka,
- Mark Malhotra,
- Session
-
- 1:00 PM to 2:30 PM
In the past, the music community conducted research on what makes music more musical or expressive. Much of this work has focused on the manipulation of phrasing, articulation and rubato to make music more expressive. However, it has been difficult to study neuromuscular control used by experts to create such musical music. This project took a first step toward this effort by using the Anatomically Correct Testbed (ACT) Robotic Hand to mimic the way expert humans play when they are instructed to perform “musically” or “robotically.” Results from 22 human subjects showed that musical expression contained a larger range of dynamics and different articulation than robotic expression, while there was no difference in the use of rubato. The ACT Hand was controlled to the level of precision that allowed the replication of expert expressive performance. Its performance was then rated by 17 human listeners against music played by a human expert to show that the ACT Hand could play as musically as an expert human. Furthermore, articulation, phrasing, and rubato were tested in isolation to determine the importance of articulation over phrasing and rubato. This type of study will lead to understanding how to implement future robots to perform musically without preprogramming them, finding ways to teach novice pianists strategies in controlling their muscles to become expressive musicians more quickly, and understanding why humans feel expressiveness or even emotion in music.
The University of Washington is committed to providing access and accommodation in its services, programs, and activities. To make a request connected to a disability or health condition contact the Office of Undergraduate Research at undergradresearch@uw.edu or the Disability Services Office at least ten days in advance.